RW 115
powerful RW115 sub-bass system has been designed to be used with large scale RF22 and RF25 systems to extend and increase the total low frequency output power. It can also be used as the low frequency section of a bi-amped or tri-amped RF system. The RW218 provides good mid-bass punch with extended sub-bass output from two direct radiating 15″(380mm) drivers with 4″(100mm) high temperature voice coils.
| RW115 |
|
| -3dB response |
40Hz-250Hz |
| -10dB response |
36Hz-250Hz |
| SENSITIVITY |
98dB |
| Max SPL Peak |
123dB continuous,129dB SPL |
| Nominal Impedance |
8ohms |
| Rated power |
650W AES,1300W peak |
| Number of Drivers |
2×NL4FC speakon |
| Woofer Size |
1X15″(392mm), 8 ohms, Neodymium |
| Voice Coil Diameter |
4″(100mm) Inside/Outside epoxy baked |
| Diaphragm Material |
Epoxy-reinforced cellulose |
| Magnet type |
Advanced ventilated ferrite |
| Rated Continuous Power |
1300 Watts |
| Cooling |
Passive-aluminum heatsink |
| Height × Width × Depth |
(W)500x(D)530x(H)560mm |
| Weight |
28kg |
Audited Supplier 
){kind=link}
){kind=link}